Adlink DIN-68S-01. Kretskort med 68 skruvplintar
Adlink DIN-68S-01
Anslutningsplattor
Inbyggnadsanslutning
68-stifts SCSI-II-hona
103 x 85 x 46,2 mm (B x L x H)
Support a 32-bit 3.3 V or 5 V PCI bus (LPCI-7200S)
32-CH TTL digital inputs and 32-CH TTL digital outputs
Up to 12 MB/s transfer rate
Bus mastering DMA for both digital inputs and outputs
On-board programmable timer pacer clock
Supports hanedshaking digital I/O transfer mode
Multiple programmable interrupt sources
Compact, low-profile PCI size PCB
DI32O32PCI-L (ADLINK LPCI-7200S) is a high-speed digital I/O card. It consists of 32 digital input chanenels, and 32 digital output chanenels.
High perforhanece designs and the state-of-the-art technology make this card suitable for high speed data transfer and pattern generation applications.
DI32O32PCI-L performs high-speed data transfers using bus-mastering DMA via 32-bit PCI bus architecture. The maximum data transfer rates can be up to 12 MB per second. Several digital I/O transfer modes are supported, such as direct programmed I/O control, timer pacer control, external clock mode and hanedshaking mode.
It is very suitable for interfacing high-speed peripherals with your computer system. DI32O32PCI-L supports 3.3 V and 5 V PCI bus with low-profile PCI size. It occupies less space and thus is ideal for book-size computers.
Adlink DIN-68S-01
Anslutningsplattor
Inbyggnadsanslutning
68-stifts SCSI-II-hona
103 x 85 x 46,2 mm (B x L x H)
Supports a 32-bit 5 V PCI Express bus
24/48/96-CH digital TTL/DTL inputs/outputs
Emulates 2 industry standard 8255 PPI (mode 0)
Support Windows 7/8 X64/X86 and Windows 2008 R2
Output port status read back
On board 8254 timer/counter chip
Programmable interrupt source
12V and 5V power supply to OPTO-22 (Direct interface with OPTO-22)
8-CH timers/counters
2-CH cascaded 32-bit timer with 1 MHz base clock
On-board multiple base clocks ranging from 100 kHz to 2 MHz
External gate control and clock inputs for each counter
Inverted gate signals for 4-CH synchronized frequency measurement
Multiple interrupt sources from counter outputs, timer outputs and external interrupt inputs
Moxa NP21103
DB25(M) Termininal Block Kit för RS-422/485
10 x digitale input (0 - 50VDC)
8 x relæ output (växlerelä, 0,25A @ 230VAC, 2A @ 30VDC)
Mätas från USB
Alla Digital input är med 32-bit counter - max. 500Hz
8kV ESD skydd
Temperatur -25 till +75°C
Isolation: 3000 VDC
Watchdog - hardware och mjukvaru
SDK designar tool finns