Supports a 32-bit 5 V PCI bus
24/48/96-CH digital TTL/DTL inputs/outputs
Emulates 4/2/1 industry standard 8255 PPI (mode 0)
Support Windows 7/8 X64/X86 and Windows 2008 R2
Output port status read back
On board 8254 timer/counter chip
Programmable interrupt source
12V and 5V power supply to OPTO-22 (Direct interface with OPTO-22)
100KHz 16Ch Analog Input A/D Card - High Gain. 16 Single-Ended or 8 Differential Analog Input Channels Bipolar or Unipolar Input Signals Programmable High-Gain x0.5, x1, x5, x10, x50, x100, x500, x1000 12-Bit Successive Approximation A/D Converter (AD774 or equivalent) On Chip Sample & Hold Two 12-Bit Analog Output Channels 16 Digital Inputs and 16 Digital Outputs Integral DC-to-DC Converter for Stable Input Operation 37-Pin D-Sub Connector Compact Size - only half-size PCB
Supporterer 3.3V eller 5V PCI bus
12-bit A/D, sampling rate op til 110kS/s
16-CH single ended eller 8-CH differential inputs
On-board A/D FIFO
Bipolar eller unipolar analog input område
16-CH TTL DI og 16-CH TTL DO
2-CH 12-bit multiplying analog outputs
16 optoisolerede indgange, fælles stel (minus) og 16 optoisolerede udgange,
Supports a 32-bit 5 V PCI Express bus - LOW PROFILE CARD
16-CH isolated digital inputs
16-CH isolated digital outputs - Open-Collector
5000 VRMS optical isolation
Sink current up to 500 mA on each isolated output
Supports a 32-bit 5 V PCI Express bus
24/48/96-CH digital TTL/DTL inputs/outputs
Emulates 2 industry standard 8255 PPI (mode 0)
Support Windows 7/8 X64/X86 and Windows 2008 R2
Output port status read back
On board 8254 timer/counter chip
Programmable interrupt source
12V and 5V power supply to OPTO-22 (Direct interface with OPTO-22)
PCI Express kort med 96 TTL I/O kanaler, samt 3 tæller
X1 PCI Express interface
96-CH digital TTL/DTL inputs/outputs
Emulates 4/2/1 industry standard 8255 PPI (mode 0)
Direct interface with OPTO-22 compatible I/O modules
Output port status read back
On board 8254 timer/counter chip
Programmable interrupt source
Support Windows 7/8 X64/X86 and Windows 2008 R2
32 D/I og 32 D/O, X1 PCI Express Interface Maks. 50 MHz clock rate fra intern timer eller 100 MHz fra eksternt ur 200 MB/s maksimum Softwarevalgbart spændingsniveau på 1,8 V, 2,5 V og 3,3 V Pr. Gruppe (8-bit) input/output retning kan vælges Understøtter I ² C og SPI programmerbare serielle grænseflader til ekstern enhedskommunikation Support Vsync & Hsync trigger til parallel digital billedoptagelse 8-kanals hjælpeprogrammerbar I/O
Universal PCI interface til +5 V and +3.3 V PCI bus.
Op til 24 digitale I/O kanaler
Programmerbare I/O porte
DIO response time 0.77 μs (1.3 MHz max.)
WIN Vista,98/NT/2000 and XP/2003 32-bit version OS
6-CH 32-bit industrial counter for three kinds of differential pulse trains, including A/B phase, CW/CCW, and Pulse/Direction
6-CH differential pulse generators up to 500 kHz
6-CH 32-bit position compare with interrupt function
6-CH 16-bit ±10 V analog output
6-CH 12-bit 133 kHz analog single-ended input
19-CH opto-isolated DI, 7-CH open collector DO
2500 VRMS isolated
10 x digitale input (0 - 50VDC) 8 x relæ output (växlerelä, 0,25A @ 230VAC, 2A @ 30VDC) Mätas från USB Alla Digital input är med 32-bit counter - max. 500Hz 8kV ESD skydd Temperatur -25 till +75°C Isolation: 3000 VDC Watchdog - hardware och mjukvaru SDK designar tool finns
Understøtter en 32-bit 5V PCI Express-bus Flere I/O-portkonfigurationer: 16-CH DI & 16-CH DO, 32-CH DI eller 32-CH DO Dataoverførselshastighed op til 160/80Mbytes/s Bus-mastering DMA med scatter-gather teknologi Indbygget intern timer pacer til clocked DIO Indbygget 32k ord FIFO ACK og REQ signaler til dataoverførsel Anbefales ikke at blive brugt i systemer med mere end 4GB hukommelse
Support a 32-bit 3.3 V or 5 V PCI bus (LPCI-7200S)
32-CH TTL digital inputs and 32-CH TTL digital outputs
Up to 12 MB/s transfer rate
Bus mastering DMA for both digital inputs and outputs
On-board programmable timer pacer clock
Supports handshaking digital I/O transfer mode
Multiple programmable interrupt sources
Compact, low-profile PCI size PCB
Dataopsamler modul med WEB interface med enkel konfiguration og kontrol
4 x digital input “dry contact”
4 x analog inputs med 0 til 60VDC
Multiplier og offset til analog inputs og sensorer
1-Wire interface til maks. 8 sensorer (maks. 16 parametre)
4 x kraftige relæ udgange med NO/NC kontakter
MODBUS TCP/IP support
SNMP v2 support with trap alarm til 5 modtagere
4 stk. skemaer for real-time kontrol af relæ udgange
Kunde specifikke logiske funktioner til relæer
Secured email
XML/JSON og HTTP API kommandoer for client-server
Dynamic DNS support for DynDNS, No-IP og DNS-O-Matic
NTP support for tidssync
Remote firmware update via standard browser
Robust DIN-Rail/vægmontering.
Stand-alone Datalogger via Ethernet
Hukommelse for 70.000 målinger
Password beskyttet Web baseret konfiguration og kontrol
2 x digital input “dry contact”
2 x analog inputs med 0 til 10VDC, 10-bit opløsning
Multiplier og offset for analog input
2 x relæ med NO/NC kontakter
1-Wire interface til 8 følere
SNMP v.2 support
SNMP traps op til 5 alarm typer
MODBUS TCP/IP support
E-mail til 5 modtagere ved betinget alarm
HTTP API kommandoer
NTP og dynamic DNS support
Remote firmware update.
Isolationen beskytter både computer og måleresultaterne mod fejl, grundet forskelle i stelpotentialer.
Supports a 32-bit 5 V PCI bus
12-bit A/D resolution
Up to 100 kS/s sampling rate
32-CH single-ended or 16-CH differential inputs
On-board 1 k-sample A/D FIFO
Bipolar or unipolar analog input ranges
Programmable gains of x1, x10, x100
Automatic analog inputs scanning
