MOXA NportW2150-EU trådløs serielportserver 2 x RS232/422/485

MOXA NportW2150-EU

ETH2SER-RL
6 709  SEK
Exkl. moms
Kvantitet
Fysiskt i lager  

  • Download PDF
  • file_download Downloads
  • live_help Ask a question

NPort W2150 / 2250 Plus is to connect serial devices such as PLC, meters, sensors until the ideal choice for wireless LAN. You can access the serial devices from anywhere over a wireless network. Further, when the devices are often moved from one place to another, the wireless LAN environment is an ideal solution.

To connect serial devices to the 802.11 a / b / g network
Difficult wiring cable space, equipment wireless networking server is the ideal solution. In Infrastructure mode or Ad-Hoc mode NPort W2250 Plus, W2150 Plus by AP node, or another NPort W2250 Plus, W2150 Plus on up to 100 meters to communicate with any host.

Feature

  • To connect serial devices to the IEEE 802.11 a / b / g network
  • RS-232/422/485 triple interface rates up to 921.6K bps
  • Can be configured via an Ethernet port or wireless Ethernet port
  • Use HTTPS, SSH enhaneced remote haneagement and configuration of security
  • By WEP, WPA, WPA2 establish secure data communications
  • Built-in WLAN site survey tool
  • Supported by custom signal strength to complete the wireless roaming
  • Serial data is temporarily stored after the break to provide network functions to provide serial data logging
  • Dual power inputs (1 power jack, 1 terminal input)

Wireless Ethernet standards: 802.11 a / b / g
RF Type: DSSS / OFDM
Transmit power: 802.11b transmit power 17 dBm (standard)
802.11g transmit power of 15 dBm (standard)
802.11a transmit power of 14 dBm (standard)
Receiving sensitivity: -80 dBm
Transfer rate: 54 Mbps (802.11a)
11 Mbps (802.11b)
54 Mbps (802.11g)
54 Mbps (maximum) Automatic fallback
(54,48,36,24,18,12,11,9,6,5.5,2,1 Mbps)
Transmission distance: 100 meters (open area)
Antenna Interface: Reverse SMA
Network Mode: Infrastructure, Ad-Hoc
Wireless network security: WEP: 64/128-bit data encryption
WPA, WPA2,802.11i: Advanced mode and pre-shared
Key (PSK) mode
Encryption: 128 TKIP / CCMP
802.11i EAP verification: PEAP, EAP-TLS, EAPTTLS,
PEAP / MSCHAPv2, PEAP / TLS,
PEAP / GTC, PEAP / MD5, AP-TTLS / EAPMD5,
EAP-TTLS / EAP-GTC, EAP-TTLS,
EAP-TTLS / EAP-MSCHAPv2, EAP-TTLS /
EAP-TLS, EAP-TTLS / MSCHAPv2, EAPTTLS /
MSCHAP
Ethernet Ethernet: 10/100 Mbps (RJ45)
Protection: Built-in 1.5 KV magnetic isolation
Serial Interface Number of ports: 2 (NPort W2250-Plus), 1 (NPort W2150-
Plus)
Interface Interface: RS-232/422/485
Port Type: DB9
Serial Data Log: 64 KB
Disconnection port data cache: 64 KB
Serial communication parameters Parity: None, Even, Odd, Space, Mark
Data bits: 5,6,7,8
Stop Bits: 1, 1.5
Flow Control: RTS / CTS, XON / XOFF, DTR / DSR
Rate: 50 ~ 921.6 Kbps
Software features protocol: ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet,
SNMP, HTTP, SMTP
Tools: Windows utility for Windows 98 / ME / 2000 / XP / 2003
Configuration methods: Web console, serial console, Telnet console,
Windows utility
Power Requirements Power Input: 12 ~ 48 VDC
Power Consumption: 560 mA
Power Interface: Power Jack or terminal
Mechaneical specifications Housing material: aluminum (1 mm)
Environmental Operating Temperature: 0 ~ 55 C (32 ~ 131 F), 5 ~ 95% RH
Storage temperature: -20 ~ 85 C (-4 ~ 185 F), 5 ~ 95% RH