RFID TAG 125kHz EM designed as Keychain, Waterproof, Durable, Gray
125kHz RFID TAG
For Keyring
Waterproof
Durable
Gray
Dimensions: 40 x 30 x 7 (L x W x D)
Subcategories
There are 31 products.
125kHz RFID TAG
For Keyring
Waterproof
Durable
Gray
Dimensions: 40 x 30 x 7 (L x W x D)
RFID Reads 125khz Em-Marin
Em 4100
64 Bit Manchester Coding
10 digit ASCII
RS232 - Only TX and GND
Wiegand Interface
Reading distance: 0 - 20cm Depending Of tag
Supply voltage: 5 - 12VDC
Use liniar power supply (not switch mode)
interface cable from the back
IP67
Goal: 78 x 43 x 15 mm
125khz RFID reader for outdoor mounting on wall
sealed with hardened epoxy - cable mid rear
EM4000 125khz RFID Reader for wall mounting
reading distance 0 - 5cm, depending on roof size
40 bit code, 10 digits ASCII (Decimal)
RS232, only TX. GND
9600, 0 Start, 8 Data, 1 Stop, Non Parity, FLOW: HW
Wiegand 26bit format
LED Indicator and Buzzer Control Manager
Supply voltage: 12VDC / 200ma
Cable length 1 meter (8 Core)
Goal: 114 x 46 x 13 mm
RS485 Command Controllet Ready / Read
Set to Read. Called to Transfer Take UID Code
10 digit Hex - (26 digits for PC)
2-wire RS485 Half-duplex.
125 kHz EM format.
12vdc 0.2a (MDFollows not)
Dimensions: 113.5 x 45.6 mm (L X B)
Keyboard emulation: 8 decimal places (HID)
frequency: 125 kHz EM 4001/4002
Power supply: 5VDC from the USB port
Operating temperature: -10 - +75°C
Humidity during operation: waterproof
Reading range: 5 ~ 15 cm
Cable length: 164 cm
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
wall mounting, water resistant
TAG, round piece, self-adhesive
1.7 x 25 mm
TAG is waterproof
TAG, cylinder, black
4.5 x 30 mm
TAG is waterproof
Take, credit card size 0.8mm.
Tags are waterproof
125kHz EM TAG with magnetic stripe
credit card format
0.8 mm, incl. Magnetic stripe
TAG is waterproof
Tag, key ring
target: 35 x 2 x 4 mm
with engraved UID code
tag is waterproof
125kHz RFID TAG
credit card size 0.8 mm
sequential ID
TAG is waterproof
125kHz RFID TAG
Designed as screw
plastic
9.5 mm Thread
12 mm head
19 mm long.
TAG is waterproof
125 kHz RFID TAG
Dim: Ø25 x 3 mm
TAG is waterproof
125kHz TAG
rectangular, transparent plastic
Dim: 20 x 25 x 0.7 mm
TAG is waterproof
125kHz RFID TAG
For key ring
Dimensions: 37 x 30 x 8 mm
with printed UID code
TAG is waterproof
125kHz RFID TAG for adhesion
Dim: 20 x 3 mm
3M tape
black
TAG is waterproof
RFID 125kHz reader with RS232
EM 4xxx Standard Tag (40 bit HEX)
Mounting in Ø 31 mm Hole
Length from Resess: 27 mm
Resess Width: 40 mm
RS232 , 9600, N, 8, 1
9 - 12VDC / 50mA
Temperature: -10 - + 70 ° C
Material: PBC
IP54 from front
125kHz RFID TAG with screw hole
50 mm diameter x 2.5 mm
Suitable for guard rounding as a checkpoint
ASK 64 bits,
Manchester encoding; 10 digits in HEX
With RFID, the code reads Decimal: 12 digits
10/100M Ethernet interface
TCP Server, UDP, DHCP
Til 125Khz ID Kort
Forsyning: 5V DC PSU max 300MA
RFID reader for RS232 / RS485 / Wiegand
IP64
Range up to 60cm
Serial communication to / from PC
Relay output (24VDC / 2A) Serial Enabled from PC
Baud Rate : 9600, 8, n, 1
Dim: 210 x 210 x 28 mm
Extended temperature -10 - 60°C
supply: DC 12V, 350mA
RFID Copy Reader / Writes to T5577 RW Tag
interface: USB
Work voltage: 5 VDC
Work current: 200mA
Standby Stream: 50mA
Normal current: 100mA
125kHz, 13,56MHz Mifare / NFC
Compatible with CCID and PC / SC
IC / ID Dual Frequency Replication
Supporter ID125K, 8800, 5200, 4305, 5577, 8265 Card
Support UID, Fuid, Cuid, UFUID
IC Semi-Encrypted Card, IC Full Encryption Card
Dim: 108 (L) x 68 (W) x 12 mm (H)
Waterproof RFID reader
only with Wiegand Interface
Connect to access controls with Wiegand
TAG Type: EM / Mifare
Reading distance: 5.8 cm
IP68
Frequency: 125kHz / 13,56MHz
LED and Buzzer
Cable out from the back
Detachable Backpiece
Supply Voltage: 12VDC
Dimensions: 86 x 86 x 22mm
Keyboard emulation: 10 digits, 40bit ASCII Decimal
frequency: 125 kHz EM 4001/4002
Power supply: 5VDC from the USB port
Operating temperature: -10 - + 75 ° C
reading range: 5 ~ 15 cm
cable length: solved USB cable
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
Desktop - desktop model
Keyboard emulation: 8 digits, 32bit Decimal
Frequency: 125kHz EM4xxx
Power supply: 5VDC from USB port
Operating temperature : -10 - + 75 ° C
reading range: 5 ~ 15 cm
cable: Fixed USB cable from bottum - epoxy filled
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
Waterproof - IP67
Dual band RFID card reader for USB - Decimal
10 characters decimal (ASCII) - 40bit
125 kHz, 13.56 MHz, NFC
125khz: EM4001, EM4002, EM4200
Mifare: ISO 1443A/B/15693
HID - Keyboard Emulation
Reading distance: Up to 10 cm
Align via USB
USB interface
Dip-SW to ID format setting - see Table
Environment: IP67 Waterproof, outdoor mounting
operating temp. -25 ° to + 70 ° C
target: 88 x 56 x 18 mm
Dual band RFID card reader for USB - Decimal
10 characters decimal (ASCII) - 40bit
125 kHz, 13.56 MHz, NFC
125khz: EM4001, EM4002, EM4200
Mifare: ISO 1443a / B / 15693
HID - Keyboard Emulation
Reading distance: Up to 10 cm
Align via USB
USB interface
ID Format setting with DIP switches - see Table
Operating Temp. -25 ° to + 70 ° C
target: 88 x 56 x 18 mm
Personell who shall document the route with the date and time
RFID TAGs placed at check-points and has unique ID
RFID TAG is 125kHz EM400X
guard pointing toward Days and press the scan button
Each TAG reading acknowledged with short vibration
Operation with a pressure
Journal memory: approximately 14,000 items
battery - easy to replace
up to 55,000 scans at full battery
interface is USB
Operating temperature: -10 to + 55 ° C
Patrol Tour Manager software included
125kHz RFID TAG as bracelet
diameter: 68mm
Blue (red on order - Contact us)
Net weight: 9.3 g
EM Standard: TK4100, ICODE2 chip
material : Silicone
operating temperature -40 - + 100ºC
storage temperature -40 - + 120ºC
Dual band RFID card reader for USB - 10 Decimal
125 kHz: EM-Marin EM41xx, EM4200
13,56MHz: Mifare - ISO14443A
HID - Keyboard Emulation
Reading distance: 5 to 8cm
Powered by USB
USB interface
operating temp. -10 ° to + 70 ° C
dimensions: 98 x 63 x 10mm (L x B x H)
RFID EM-Marin and QR code reader
125kHz EM4100/4200
Reading as facing right
Built-in buzzer for sound notification
Can read multiple formats
With CPU watchdog
Power supply: 12V DC
Wiegand 26/34 bits
Dimensions: 125 x 83 x 30 mm
125kHz EM 4xxx reader with USB
USB HID (plug and play)
Powered from USB
Additional purchases from Decimal to HEX, normal or reverse
Additions with start and or stop character
Supports: EC standard 125kHz
Dimensions: 100 x 65 x 23 mm
Material: ABS
REMEMBER: Order the desired version - additional purchase