Loadcell 10 kg
Standard Cell m / M8 x 1.25 thread; Full load = 10 Kg
We have a very large selection of load cells for tension and compression, torque measurement for steady and rotating items.
There are load cells in many designs and weight classes. Contact our sales personnel for guidance and prices. Do you have special requirements we will be happy to look into this. We can also offer load cells for projects.
Note: It is a very small selection you will find on our website ..
Subcategories
There are 46 products.
Standard Cell m / M8 x 1.25 thread; Full load = 10 Kg
Standard cell m / M8 x 1.25 gevind; Full load = 20 Kg
The standard load cell m / M8 x 1.25 thread
S-beam type
Full Load = 5 kg
Maximum load: 7.5kg
Standard Cell m / M8 x 1,25 Anslutningsgänga; Full belastning = 50 kg
Tryck cellrad m / M20 x 1,5 gänga; Full belastning = 1000 kg
Single point celle m/M8 x 2,5 gevind; Fuld belastning=250 Kg
Præcisions-vejeforstærker med RS232-udgang
Vejeforstærker med RS232-udgang, standardversion
Standardcelle m/M12 x 1,75 gevind; Fuld belastning=100 Kg
Standardcelle m/M12 x 1,75 gevind; Fuld belastning=1000 Kg
Standardcelle m/M12 x 1,75 gevind; Fuld belastning=300 Kg
Standardcelle m/M12 x 1,75 gevind; Fuld belastning=500 Kg
Vejeforstærker til forsyning med 110/220/240 VAC eller med 24 VDC
SMT Overload Protected S-Type Load Cel
S-type load cell
impedance input: 410 ohm
Iimpedance output: 350 ohms
Exitation: 10 - 15V
4-wire
Thread in top and bottom: M8 x 1 , 25 mM
Full load = 100kg
Overload: max. 150%
16-bit strain gauge / weighing bridge amplifier - datalogger
With temperature compensation
Excitation sense 2.5VDC
Bridge input: +/- 8mV Version: 16mV and 32mV
4 Megabyte memory to log data
USB and RS232, automatic baud rate up to 115.2kbit
Programmable input ranges (0-2 VDC, 0-20 VDC)
Battery operation - 10 year battery
Acc.: Software to configure, download, plotting, analysis and an alarm (not supplied)
Configurable alarm controls
Measurement speed of from 20 milliseconds (channel 1) to 12 hours
Robust aluminum housing
coated printed circuit board for protection against moisture, corrosion