Weighing indicator with digital display readout
Electronic weighing
7,632.00 SEK
Excl. VAT
Quantity
Product number TI500E
The TI-500E is an NTEP and Canadian certified digital indicator housed in a durable black ABS enclosure. It is equipped with a large easy to read 0.6” LED display. Capable of powering up to 4-350Ω load cells, this simple device can handle a multitude of functions. A full duplex RS-232 port can transmit data on demand or continuously to match the input requirements of a wide variety of peripheral devices including printers, remote displays and computers. The setup and calibration parameters are shared with other TI series indicators for consistently easy and trouble free use and maintenance.
The TI-500E is the leader in reliable performance and value.
All Transcell indicators come with an adapter.
Andre produkter i samme kategori:
Programmable Load Cell Instrument and controller, LCD Display, Connection up to 16 Load Cell, IP66 NMEA 4X
Top-class weighing instrument from Interface
LCD screen, W x H - 117 x 86 mm
Display up to four channel channels per screenshot
With required Legal for Trade information
32 scale accumulations
Millivolt calibration, 5-point linearization and geographic calibration
NEMA Type 4X / IP66 stainless steel enclosure
Selectable A/D with measurement speed up to 960/second
100 set points, 30 configurable
64K uses built-in Non-V RAM
Power for 16, 350 ohm load cells per A / D card
Peak team
Call +45 56 66 20 20 for price
Item Number: LC-920I-UNI
Portable load cell instrument. 4 Wire Strain Gauge input. Single pass calibration, direct, mV/V with TEDs
Handheld 7-digit LCD screen
4 Wire Full Bridge input
with Peak, Trough, Net, Overload and Shunt Cal Indication
Battery operation of 450 hours in power saving mode
Keys for ON / OFF , Interval Selection, Peak / Valley Hold and Gross / Net
Single Calibration (Direct mV/V) with double range for values such as kg and lb
Weighing only 250 grams
IP65 / NEMA4
TEDs Enabled to automatic Sensor calibration (IEEE1451 - Template 33)
Buy Leather case
Battery: 2 x AA
13,686.40 SEK
Item Number: INST-LOADCELL-HH
Portable load cell instrument for strain gauge input. Multi-point calibration, direct, mV/V. Logging and graphing. With TEDs
Sovereign Linearity Specifications
Excitation Voltage: 3.3Volt
Resolution: 24bit
% FS: 0.0002
Measurement speed up to 2400 samples per. Second
High internal resolution (up to 500,000 Counts)
IP67 Searched cabinet
Battery powered (long battery life)
128 x 64 Graphic screen with backlight
More display modes (Peak / bottom, Delta, Live , gross and net)
logging and graphing for PC (software is included)
support Ted's template 33, 40 and 41
Live calibration and multi-point calibration
Dim: 170 x 94 x 42 mm
Weight: 330 grams
21,390.40 SEK
Item Number: INST-LOADCELL-PSD
Load cell - Strain Gauge data logger up to 6-wire, 16bit, 4MB memory, 20ms sampling time, Battery operation, USB
16-bit strain gauge / weighing bridge amplifier - datalogger
With temperature compensation
Excitation sense 2.5VDC
Bridge input: +/- 8mV Version: 16mV and 32mV
4 Megabyte memory to log data
USB and RS232, automatic baud rate up to 115.2kbit
Programmable input ranges (0-2 VDC, 0-20 VDC)
Battery operation - 10 year battery
Acc.: Software to configure, download, plotting, analysis and an alarm (not supplied)
Configurable alarm controls
Measurement speed of from 20 milliseconds (channel 1) to 12 hours
Robust aluminum housing
coated printed circuit board for protection against moisture, corrosion
13,281.60 SEK
Item Number: LOG-MIBG
Previous
Next







