RS232 serial extender up to 250 meters via RJ45 point to point cable. 5VDC with Power over Cable
RS232 Rxtends up to 250 meters over RJ45 cable
Baud rate: 110 ~ 921,600, 8-bit
Use STP (shielded) patch cable - straight through
The network cable must not be connected to the patch panel
1 x 5VDC/1A - the power supply supplies both devices (PoC)
Important: If the distance is long, 2 power supplies are recommended
Important: If the network cable is of poor quality, use 2 power supplies
2,400.00 SEK
Excl. VAT
Quantity
Physically in stock
Product number BOOST-RS232RJ45+
Specifications
| Baudrate | 110 - 921.6k, 8 databit |
|---|---|
| Standarder | RS232 (5 ledere) |
| Stik | DB9 han / DB9 hun / RJ45 hun / DC Jack |
| Strømforsyning | 5VDC/1A adapter |
| Dimensioner | 50 (B) x 67 (D) x 23mm (H) |
Booster (set) for RS232 with DB9 male / female
Extends any compatible RS232 device up to 250 meters from the source
CAT 6 female connector with screen - for STP cable
Perfect for digital signage
Simple and easy installation
Baud rate: 110 ~ 921,600
Data bit: 8-bit
5VDC/1A
Andre produkter i samme kategori:
1 serielportserver port RS232 / 422/485, DE-MOXA 211 Serial Device Server
External COM ports via Ethernet and Internet
3-in-1 Serial Port: RS-232, RS-422, OR RS-485
Modes: TCP Server, TCP Client, UDP
Ethernet Modem
Pair Connection
Real Com / Tty Drivers for Windows and Linux
2-wire RS-485 with Patented Automatic Data Direction Control (Addc®)
Built-in 15 kV ESD Protection for All Serial Signal
2,168.00 SEK
Item Number: ETH1SER+
2 Ports seriesport server with RS232, Moxa Nport 5210A. Serial Device Server with 2 x DB9 he
External COM ports via Ethernet and Internet
Compact and but finding room for
Socket Modes: TCP Server / TCP Client / UDP
Windows Utility for Configuring Multiple Device Servers
Supports 10 / 100m Ethernet
2 x DB9 male
SNMP MIB-II for Network Management
Power supply included
3,523.20 SEK
Item Number: ETH2SER232+DB9
RS232 for RS485 or RS422 Converter, Galvanically Isolated, Baud Rate from 50 - 921.6 Kbit/S, MOXA TCC -100I
Industrial RS232 to 422/RS485 Serial Converter/ Repeater with 2 KV Isolation, MOXA TCC-100i
RS-232 to RS-422 conversion with RTS/CTS support
RS-232 to 2-wire or 4-wire RS-485 conversion
2 KV isolation protection (TCC-100I/TCC-100I-T)
Wall and DIN-rail mounting
Plug-in terminal block for easy RS-422/485 wiring
LED indicators for power, Tx, Rx
-20 to 60°C operating temperature
2,403.20 SEK
Item Number: CNV232I485M-OPT
Internal USB to RS232 converter card with 5V on DB9
Two 16550 High performance UART (RS232) serial channels
Occupies one PCI or PCIe bus slot
Low Profile PCI Form Factor
Includes Low Profile PCI & Regular size PCI two brackets
Both USB A type and USB pin header connector on board to host connection
One RS232 DB9M and one RS232 10pin RJ45 serial ports on board
Includes one 10pin RJ45 – DB9M Bridge cable for 2nd DB9M port
5VDC Power output from each DB9M Port for POS device use application
2 Jumpers Individually enable / disable 5VDC output for each DM9M Port
On Board Molex mini 4Pin Power connector for sufficient DB9M 5V bus power from PC power supply
Supports 32bit/64bit Windows 7, Vista, XP, 2000, ME, 98SE
284.80 SEK
Item Number: CNV-USB-RS232INT
Previous
Next







