12VDC 1.5Amp (18Watt) power adapter from 110 - 240VAC, plug 5.5 / 2.1mm
Mains adapter - switch mode type
110-240 VAC to 12VDC/1.5A
DC plug: 5.5/2.1 mm
1 meter cable
Max. 1920 x 1200 pixels
1 x KVM Extender Console Unit - Remote module
1 x KVM Extender Computer Unit - Local module
1 x 12V DC Power supply included for remote module
1 x KVM cable ( VGA)
USB (2 on Console Unit, 2 on PC Unit)
Only VGA and USB Mouse / Keyboard Transfer
Does Not Transmit Touch from Monitor
USB is only for mouse and keyboard
For point RJ45 network cable up to 200 meters
with Edid Emulation
2 controls for the same PC
Video adjustment
Boost 200 is a KVM extension (Keyboard Video Mouse), which consists of a local and remote module, so a PC or server can be operated locally or up to 200 meters away via a stp (shielded) network cable. Boost 200 transfers the signals for both mouse and keyboard and image in full HD with highest resolution (WUXGA) 1920 x 1200 and (UXGA) 1600 x 1200 points. Is equipped with a good image compensation.
IMPORTANT: Can emulate missing edid with programming of desired image resolution - is a requirement at Win7 and later.
PC or server connected to Boost 200 can either be with USB or PS / 2 Connection. If the PC has PS / 2 outputs, use 1 pcs. k-boost200-p as well as 2 pcs. CNV USB PS2 + one for the local module and one for the remote module. Keyboard and mouse must be with USB, also for PCS with only PS2.
included 1 pc. Multicable from Extender to PC with VGA and USB connector
Mains adapter - switch mode type
110-240 VAC to 12VDC/1.5A
DC plug: 5.5/2.1 mm
1 meter cable
KVM kabel m/2 x PS/2 hanstik og 1 x DB15HDM, 1.8 m
Multikabel fra lokalmodulet til pc med VGA og PS/2 stik
KVM receiver to create several operating positions for one PC sends
KVM Extender up to 150 meters point to point Cat 6 cable
KVM Extender over TCP / IP.
A BOOST HDMI150-D LO transmitter supports up to 253 recipients
up to 1920 x 1080p @ 60Hz
Audio Format: DTS-HD / Dolby true HD / LPCM7.1 / DTS / DSD
USB KVM feature: Keyboard and mouse (HID signal) remote
USB 2.0 up to 480Mbps
Over router / switch with IGMP snooping
H.264 video.komprimering
Video standard: HDMI 1.3 and HDCP 1.2 standard
EDID emulation via PC's graphics card
4K30 HDMI Receiver over IP with HDMI out
4K30 HDMI Receiver Point to Point with RJ45 Up to 150 meters
4K30 HDMI Receiver Point to Point with Fiber
If Fiber Connection - Buy SFP Module
Suitable as HDMI Extender and Recipient to Video Wall
Receiving video from selected transmitter / transmitter
Receiver 1 to 1 or 1 to 8x16 Video Wall
4 x USB 2.0 (Hub 2 x USB1. 1, 2 x USB 2.0)
RS232 port (DUPLEX)
Goal: 210 x 123 x 40 mm
Supply: 5VDC 600mA (PSU 5VDC / 1.5A)
0 - + 55 ° C
Free App
HDMI Booster, set with 1 x transmitter, 1 x receiver
4K HDMI + USB + Serial extender of Giga LAN (POE)
Point-to-point RJ45: Up to 100 meters
Over TCP / IP LAN Extender
Video signal 4x USB 2.0 signal over LAN
Up to 16 receivers to one transmitter selection via DIP switch
Up to four pairings while the Gigabit LAN
Switch must support IGMP snooping, multi casting
Auto EDID emulation
HDMI with stereo sound
Bi-directionel IR
HDCP approved and Blu-ray ready
4K @ 30Hz, 2160p, 1080p, 1080i, 720p, 720i
Full HD, 4K UHD system
Video wall: 2 x 2, 3 x 3, 4 x 4 ... 9 x 9 display format
Dimensions: 130 x 117 x 28 mm
Transfers HDMI video and sound and USB up to 120 meters above network cable
Transfer HDMI video and audio and USB over LAN networks
Set with transmitter and receiver
1920 x 1080 @ 60Hz
Supporter and mice
Supporter TCP / IP and Local Edid
Supporter IR
HDMI 1.3 / HDCP 1.2
Transmitter: 1 x HDMI, 1 x USB-B, 1 x RJ45 Ethernet
Receiver: 1 X HDMI, 2 x USB-A, 1 x RJ45 Ethernet
Built-in auto adjustment system
Built-in ESD protection system
Power supply: DC 5V / 2A (supplied)