Double electronic door magnet for 12 / 24VDC with switching. Indoor double doors. Holding force up to 2 x 545 kg
Electronic door magnet for double-doors, whop door etc.
Holding power up to 545 kg for each door
Aluminum House and Vandalsproof
Supply voltage for team: 12VDC or 24VDC, minimum 2 x 6 watts
Automatic switching between 12 and 24VDC
No holding power at voltageless
Operating temperature: -10 - 55 ° C
humidity: 0-95% non-condensing
double magnet: 533 x 71 x 40 mm
Door plates: 185 x 61 x 16 mm
Double mounting plate: 533 x 40 x 8 mm
Weight: approx. 5.6 kg
Buy access system - see accessories
5,830.40 SEK
Excl. VAT
Quantity
Product number DOOR-MAGNET-SLI25
Door-magnet-SLI25 is used for wing doors, swing doors, double doors o.li., where an electronic locking plate cannot be installed. Door-magnet-SLI25 can be used with most access control controls that have single or double relay output. The product contains 2 powerful electromagnets that "lock" themselves to the piece of metal mounted on the respective door. When there is voltage on Door magnetic SLI25, the door cannot be opened. An access control connected to Door-magnet-SLI25 accepting e.g. A password will interrupt the voltage to the magnetic coil and the magnets release so that the doors can be opened. Holding force: 2 x 545 kg. Automatic switching between 12VDC and 24VDC voltage to the holding magnet. Estimated power consumption is a minimum of 12watt. Since the electromagnets are supplied with voltage in hold mode, the power supplies for door magnetic SLI25 should supply at least the dual power (25 - 50watt), this to minimize heat generation in the power supply.
Andre produkter i samme kategori:
Outdoor wireless PIR sensor - infrared motion sensor with antenna, battery operated, 35 m
Wireless infrared outdoor PIR motion sensor
External antenna
Adjustable range sensor 10-35m / 750 sqm
Battery operated 2 x AAA 1.5 volt
Operating temperature -20 to + 55 °
IP55 close to 150 meters line-of-sight
For wall mounting (fittings included)
The system does not work without reciever PIR-WL-R
2,726.40 SEK
Item Number: PIR-WL35
Modtager til PIR-WL35 - styreenhed til eksternt udendørs trådløst PIR system
Modtager/ styreenhed til trådløst PIR system
Håndterer 1-3 sensorer/ detektorer
Forsynes via 12V dc 35mA
Driftstemperatur -20 til +55°
IP65 tæt til udendørs brug
Frekvens 433 MHz - rækkevidde 150m
Til vægmontering
Virker ikke uden PIR sensor PIR-WL35
3,779.20 SEK
Item Number: PIR-WL-R
Waterproof electronic door magnet, 12VDC. Stainless steel house. Holding force up to 136 kg
The door magnet with holding force up to 136 kg
stainless steel housing full sealed with epoxy
Voltage for holding: 12VDC 6 Watt
No holding force at voltageless
Operating temperature: -10 to +55°C
Magnet: 170 x 32 x 24 mm
Amaturple plate: 152 x 32 x 10 mm
Anti magnetic function
Weight: Approx. 2.5 kg
1,969.60 SEK
Item Number: DOOR-MAGNET-170U
Waterproof electronic door magnet, 12 / 24VDC switching. Stainless steel, 100% sealed. Holding force up to 363 kg
The door magnet with holding force up to 363 kg
Rust free steel cabinet full sealed with epoxy and is vandal safe
Voltage for hold: 12VDC or 24VDC, 6 Watt
Switch between 12 and 24VDC
No holding force at no voltage
Operating temperature: -10 to + 55 ° C
Magnet: 216 x 53 x 32 mm
Amaturple plate: 185 x 45 x 14 mm
anti magnetic function
Weight: Approx. 4.5 kg
2,731.20 SEK
Item Number: DOOR-MAGNET-V8
Electronic lock, for mounting on cupboards and doors, holding force approx. 100kg, 12-28VDC
Compact motorized lock with separate pawl
Locked without tension
Releases the locking pawl in case of short-term tension
The pal part has a push-out (5-8mm)
Adjustable delay on relocking 2 to 5 seconds
2 lock inputs
Can be mounted in 2 different ways
Control voltage - 12 - 28VDC / VAC, max. 165mA
Dimensions: 60 x 60 x 22mm
1,260.80 SEK
Item Number: LOCK-CAB12-28V100
Waterproof electronic door magnet, holding force 545 kg, 12 / 24VDC / 6 Watt. Bond-sensor Stainless steel, 100% sealed
door magnet with clamping force up to 545kg
Rusrfri steel cabinet full sealed with epoxy and is vandal proof
Equipped with thread for flexible tube to protect the cable
Supply voltage for team: 12VDC or 24VDC, 6Watt
Cable change-over between 12 and 24 VDC
Only holding force when energized
With Bond Sensor (Lock indicator)
Operating temperature: -10 to + 55°C
Magnetic: 220 x 62 x 41 mm
Door-plate: 185 x 61 x 16 mm
Anti-magnetic feature
Weight: ca. 5 kg
2,372.80 SEK
Item Number: DOOR-MAGNET-V12
Previous
Next







